This 3D printed file is for the DJI O4 canopy, which is used on our 3.5inch frame.
You need to prepare the following screws to complete the build.
- M2 x 25 cup head hexagon screws x 4
- M2 self-locking nuts x 4
3D Printed DJI O4 Canopy for TUNERC 3.5inch Frame Print
Created by: Aria Chen
Modified on: Fri, 11 Jul, 2025 at 1:51 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.