3D Printed DJI O4 Pro Canopy for TUNERC Iris F154 Carbon Fiber Frame (Separate Arms) : TUNERC

3D Printed DJI O4 Pro Canopy for TUNERC Iris F154 Carbon Fiber Frame (Separate Arms) Print

Created by: Aria Chen

Modified on: Wed, 12 Nov, 2025 at 3:09 PM

We used the same Iris F154 carbon fiber frame (separate arms) in our 3" and 3.5" toothpick bundles.

Download the attachment for the canopy files.

During the assembly, do not bend the antenna feed line excessively. Excessive bending of the antenna may cause damage to the antenna.

stl

(612 KB)

stl

(698 KB)

stl

(309 KB)

Aria is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk